Drive Shaft Seal, Rear

Drive shaft seal, rear, 4WD

To remove

1. Remove Drive shafts, rear, 4WD.
2. Remove the seal with 87 92 350 Puller, drive shaft seal and 87 91 683 Puller.





To fit

1. Fit the new seal using DT-49068 Fitting drift, drive shaft seals.





2. Fit Drive shafts, rear, 4WD.
3. Check the oil level in the final drive gear, see Checking/changing the oil in the limited slip differential. Check/Change of Oil In the Limited Slip Differential