Check/Change of Oil In the Limited Slip Differential
Check/change of oil in the limited slip differentialTo remove
1. Place the car flat on a lift.
2. Loosen the level plug (A).
3. When changing: Loosen the drain plug (B).
4. When changing: Drain the oil.
5. When servicing: Draw or drain out 150 ml oil.
To fit
1. When changing: Fit the drain plug (B) with a new sealing washer.
2. Add oil until it begins to flow out, using a clean funnel and hose. The oil level should be at the lower edge of the hole, see Fluid capacity and grade of fluid.
3. When servicing: Refill 150 ml new oil.
4. Fit the level plug (A) with new sealing washer.
Tightening torque: plugs 25 Nm (18.4 lbf ft)