Air Breather Hose

AIR BREATHER HOSE

Removal and Installation


COMPONENTS












REMOVAL

1.Remove battery. Removal and Replacement.
2.Remove air duct (front), air duct (inlet) and air cleaner case. Removal And Installation.
3.Remove air breather hose.

CAUTION:
When air breather hose is removed, be sure to hold two way connector securely.

INSTALLATION

Installation is in the reverse order of removal.
- When installing air breather hose on two way connector, aim paint mark face toward the vehicle front.
- When installing air breather hose on two way connector, push it until it hits transaxle case.
- When installing air breather hose to air duct and air cleaner case, make sure that clips are fully inserted.

CAUTION:
Make sure air breather hose is not collapsed or blocked due to folding or bending when installed.