Removal and Replacement

BATTERY

Removal and Installation


EQUIPPED WITH M/T OR A/T

Removal





1.Disconnect battery negative (1) and positive (2) terminals.

CAUTION:
Disconnect the battery negative terminal first.
2.Remove battery hold-down wedge bolt (A) and remove battery hold-down wedge bracket (3).
3.Remove battery cover.
4.Remove battery.
Installation
Installation is in the reverse order of removal.

CAUTION:
Connect the battery positive terminal first.
Battery wedge bracket bolt: 14.2 Nm (1.4 kg-m, 10 ft-lb)
Battery terminal nut: 5.4 Nm (0.55 kg-m, 48 in-lb)

Reset electronic systems as necessary. Required Procedure After Battery Disconnection.

EQUIPPED WITH CVT

Removal





1.Disconnect battery negative (1) and positive (2) terminals.

CAUTION:
Disconnect the battery negative terminal first.
2.Remove battery hold-down frame bolts (A) and remove battery hold-down frame (3).
3.Remove battery cover.
4.Remove battery.
Installation
Installation is in the reverse order of removal.

CAUTION:
Connect the battery positive terminal first.
Battery hold-down frame bolt: 14.2 Nm (1.4 kg-m, 10 ft-lb)
Battery terminal nut: 5.4 Nm (0.55 kg-m, 48 in-lb)

Reset electronic systems as necessary. Required Procedure After Battery Disconnection.