Work Procedure
ADDITIONAL SERVICE WHEN REPLACING ECM
Work Procedure
1. PERFORM INITIALIZATION OF NVIS (NATS) SYSTEM AND REGISTRATION OF ALL NVIS (NATS) IGNITION KEY IDS
Work Procedure.
- GO TO 2.
2. PERFORM ACCELERATOR PEDAL RELEASED POSITION LEARNING
Work Procedure.
- GO TO 3.
3. PERFORM THROTTLE VALVE CLOSED POSITION LEARNING
Work Procedure.
- GO TO 4.
4. PERFORM IDLE AIR VOLUME LEARNING
Refer toWork Procedure.
- GO TO 5.
5. PERFORM G SENSOR CALIBRATION
Work Procedure.
- END