Work Procedure

G SENSOR CALIBRATION

Work Procedure


1. PREPARATION BEFORE CALIBRATION PROCEDURE

1.Park the vehicle on a level surface.
2.Adjust air pressure of all tires to the specified pressure. [1][2]Specifications.
- GO TO 2.

2. PERFORM CALIBRATION

With CONSULT
1.Turn ignition switch ON.

CAUTION:
Never start engine.
2.Select "Work Support" mode in "ENGINE.
3.Select "G SENSOR CALIBRATION".
4.Touch "Start".

CAUTION:
Never swing the vehicle during "G sensor calibration".
Is "COMPLETED" displayed?
YES- END
NO- Perform steps 1 and 2 again.