Removal And Installation

COOLING FAN

Removal and Installation


REMOVAL

1.Drain engine coolant. Draining Engine Coolant.

CAUTION:
- Perform this step engine is cold.
- Never spill engine coolant on drive belt.
2.Remove engine cover.
3.Remove front bumper. Exploded View.
4.Remove radiator core support upper. With Intelligent Key System (With Intelligent Key)
or Without Intelligent Key System (Without Intelligent Key).
5.Disconnect cooling fan harness connector.
6.Remove reservoir tank. Exploded View.
7.Remove radiator hose (upper). Exploded View.
8.Remove cooling fan assembly.

CAUTION:
Be careful not to damage or scratch on radiator core when removing.

INSTALLATION

Note the following, and install in the reverse order of removal.

CAUTION:
Only use genuine parts for fan shroud mounting bolt and observe the specified torque (to prevent radiator from being damaged).
NOTE:
Cooling fan is controlled by ECM. For details, Component Tests and General Diagnostics.