Without Intelligent Key System

RADIATOR CORE SUPPORT

Removal and Installation


RADIATOR CORE SUPPORT UPPER

Removal
1.Remove front bumper fascia. Removal And Installation.
2.Remove front combination lamp (LH and RH). Removal And Installation.
3.Remove headlamp (LH and RH). Removal And Installation.
4.Disconnect crash zone sensor harness connector. Removal And Installation.

CAUTION:
Turn ignition switch OFF, disconnect battery negative terminal and then wait for at least 3 minutes.
5.Remove hood lock and hood lock cable fixing clip. Without Intelligent Key System.
6.Remove horn bracket. Removal And Installation.





7.Remove upper fixing clips (2) of air guide (LH and RH) (1).
8.Remove hood support rod. Without Intelligent Key System.
9.Remove mounting bolts, and then remove radiator core support upper.
Installation
Install in the reverse order of removal.

RADIATOR CORE SUPPORT LOWER

Removal
1.Remove front bumper fascia. Removal And Installation.





2.Remove lower fixing clips (2) of radiator side seal (LH and RH)
(1).





3.Using strings (A), hang inlet hose (1) and inlet hose (2) together with charge air cooler.

CAUTION:
Never damage inlet hoses and charge air cooler.





4.Support lower side radiator using wooden blocks (A) and a floor jack (B).

CAUTION:
Never damage radiator.
5.Remove mounting bolts, and then remove radiator core support lower.
Installation
Install in the reverse order of removal.