Retained Power Operation Does Not Operate Properly

RETAINED POWER OPERATION DOES NOT OPERATE PROPERLY

Diagnosis Procedure


1. CHECK DOOR SWITCH

Check door switch.
With Intelligent Key System.
Is the inspection result normal?
YES- GO TO 2.
NO- Repair or replace the malfunctioning parts.

2. CHECK SUNROOF MOTOR ASSEMBLY POWER SUPPLY AND GROUND

Check sunroof motor assembly power supply and ground circuit.
Sunroof Motor Assembly.
Is the inspection result normal?
YES- GO TO 3.
NO- Repair or replace the malfunctioning parts.

3. REPLACE BCM

- Replace BCM. With Intelligent Key System (with Intelligent Key) or "Removal and
Installation" (without Intelligent Key).
- Confirm the operation after replacement.
Is the result normal?
YES- INSPECTION END
NO- Check intermittent incident. Intermittent Incident.