ABS

DIAGNOSIS AND REPAIR WORK FLOW

Work Flow


1. COLLECT INFORMATION FROM THE CUSTOMER

Get detailed information from the customer about the symptom (the condition and the environment when the incident/malfunction occurred) using the diagnosis worksheet. VDC/TCS/ABS.
- GO TO 2.

2. PERFORM SELF DIAGNOSTIC RESULT

Perform self diagnostic result. ABS.
Are any DTCs displayed?
YES- Testing and Inspection.
NO- GO TO 3.

3. CHECK SYMPTOM OPERATING CONDITION

Check that the symptom is a normal operating condition. ABS.
Is the symptom a normal operating condition?
YES- Inspection End.
NO- GO TO 4.

4. CHECK WARNING LAMPS OPERATION

Check warning lamps operation.
- ABS warning lamp: ABS.
- brake warning lamp: ABS.
Is ON/OFF timing normal?
YES- GO TO 5.
NO- Perform warning lamp diagnosis. ABS (ABS warning lamp) or ABS (brake warning lamp).

5. PERFORM DIAGNOSIS APPLICABLE TO THE SYMPTOM

Perform diagnosis applicable to the symptom. ABS.
- GO TO 6.

6. FINAL CHECK

Perform self diagnostic result again, and check that the malfunction is repaired. After checking, erase the self diagnosis memory. ABS.
- Inspection End.