ABS

BRAKE WARNING LAMP

Description







Component Function Check


1. BRAKE WARNING LAMP OPERATION CHECK

Check that the lamp illuminates after the ignition switch is turned ON, and turns OFF after the engine is started.
Is the inspection result normal?
YES- GO TO 2
NO- Go to diagnosis procedure. Refer to "Diagnosis Procedure".


Diagnosis Procedure


1. CHECK SELF DIAGNOSTIC RESULT

Perform ABS actuator and electric unit (control unit) self diagnostic result. ABS.
Is the inspection result normal?
YES- GO TO 2
NO- Check items displayed by self diagnostic result. Testing and Inspection.

2. CHECK COMBINATION METER

Check if the indication and operation of combination meter are normal. Work Flow.
Is the inspection result normal?
YES- Replace ABS actuator and electric unit (control unit). ABS.
NO- Repair or replace combination meter. Removal And Installation.