Rear Parcel Shelf Finisher Coupe

REAR PARCEL SHELF FINISHER

Removal and Installation - Rear Parcel Shelf Finisher


REMOVAL

1.Remove rear lower finisher RH/LH. Removal And Installation Coupe.
2.Remove rear pillar finisher RH/LH. Removal And Installation Coupe.
3.Remove upper pillar finisher RH/LH. Removal And Installation Coupe.
4.Remove the clips, then remove rear seatback latch cover.
5.Remove the key cylinder cover and child anchor covers from the rear parcel shelf finisher. Child Anchor And Key Cylinder Covers Coupe.
6.Remove high mounted stop lamp. Service and Repair.
7.Remove the clips, then remove rear parcel shelf finisher.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:
Make sure that clips are fully aligned with panel holes on body when installing, then press them in completely.