Removal And Installation Coupe

FLOOR TRIM

Removal and Installation


REMOVAL

1.Remove front seat (RH/LH) and rear seat cushion. Coupe (front seat) and Coupe (rear seat).
2.Remove front body side welt. Removal And Installation Coupe.
3.Remove center console. Disassembly And Assembly.
4.Remove the diagnosis sensor unit. Service and Repair.
5.Remove front seat belt floor anchor bolt (RH/LH). Removal And Installation.
6.Remove rear lower finisher. Removal And Installation Coupe
7.Remove support bracket.
8.Remove the front kicking plates. Removal And Installation Coupe.
9.Fold corners toward center, then remove floor carpet.

INSTALLATION

Installation is in the reverse order of removal.