Front Wheel Hub And Knuckle

FRONT WHEEL HUB AND KNUCKLE

Inspection


INSPECTION AFTER REMOVAL

Check the following items, and replace the part if necessary.
- Check components for deformation, cracks, and other damage.
- Check boots of transverse link and steering outer socket ball joint for breakage, axial end play, and swing torque.
- Transverse link: Inspection.
- Steering outer socket (With heated steering wheel): With Heated Steering Wheel.
- Steering outer socket (Without heated steering wheel): Without Heated Steering Wheel.

INSPECTION AFTER INSTALLATION

1.Check wheel sensor harness for proper connection. Exploded View.
2.Check the wheel alignment. Wheel Alignment Inspection.
3.Adjust neutral position of steering angle sensor. Work Procedure.