Trunk / Liftgate Striker: Service and Repair

BACK DOOR

BACK DOOR STRIKER : Removal and Installation


REMOVAL

1.Remove luggage rear plate. Refer to "LUGGAGE REAR PLATE : Removal and Installation" Luggage Rear Plate.
2.Remove TORX bolts, and then remove back door striker.

INSTALLATION

Note the following items, and install in the reverse order of removal.

CAUTION:
- After installation, check back door open/close, lock/unlock operation.
- After installation, perform the fitting adjustment. Refer to "BACK DOOR ASSEMBLY : Adjustment" Adjustments.