Luggage Rear Plate

LUGGAGE FLOOR TRIM

LUGGAGE REAR PLATE : Removal and Installation


CAUTION:
- When removing, always use a remover tool that is made of plastic to prevent damage to the parts.
- Never damage the body.

REMOVE

1.Remove back door weather-strip. Refer to "BACK DOOR WEATHER-STRIP : Removal and Installation" Service and Repair.
2.Remove luggage floor board. Refer to "LUGGAGE FLOOR BOARD : Removal and Installation" Luggage Floor Board.
3.Remove luggage rear plate.





a.Disengage luggage rear plate fixing clips (A).





b.Disengage luggage rear plate fixing pawls and metal clips with a remover tool (A), and then remove luggage rear plate.

CAUTION:
Always remove the part while lifting it up toward vehicle upper. Or otherwise, the parts that are stuck in luggage side lower finisher may be damaged.


INSTALLATION

Note the following item, and install in the reverse order of removal.

CAUTION:
When installing, check in advance that pawls and metal clips are accurately aligned with the holes on body side, and then install by pressing in.