Check at Idle

Check at Idle
1. CHECK STARTING THE ENGINE
1. Park vehicle on flat surface.
2. Move selector lever to P or N position.
3. Turn ignition switch OFF.
4. Turn ignition switch START.
Is engine started?
YES >> GO TO 2.
NO >> Stop Road Test. Mark the box on the CVT-169, "Engine Cannot Be Started in P or N Position" on the CVT-32, "DIAGNOSTIC WORKSHEET". Go to CVT-169, "Engine Cannot Be Started in P or N Position". Engine Cannot Be Started In P or N Position

2. CHECK STARTING THE ENGINE
1. Turn ignition switch ON.
2. Move selector lever to R, D or L position.
3. Turn ignition switch START.
Is engine started?
YES >> Stop Road Test. Mark the box on the CVT-169, "Engine Cannot Be Started in P or N Position" on the CVT-32, "DIAGNOSTIC WORKSHEET". Go to CVT-169, "Engine Cannot Be Started in P or N Position". Engine Cannot Be Started In P or N Position
NO >> GO TO 3.

3. CHECK P POSITION FUNCTION
1. Move selector lever to P position.
2. Turn ignition switch OFF.
3. Release parking brake.
4. Push vehicle forward or backward.
5. Apply parking brake.
Does vehicle move when it is pushed forward or backward?
YES >> Mark the box CVT-170, "In P Position, Vehicle Moves Forward or Backward When Pushed" on the CVT-32, "DIAGNOSTIC WORKSHEET". Continue Road Test.
NO >> GO TO 4.

4. CHECK N POSITION FUNCTION
1. Start engine.
2. Move selector lever to N position.
3. Release parking brake.
Does vehicle move forward or backward?
YES >> Mark the box CVT-170, "In N Position, Vehicle Moves" on the CVT-32, "DIAGNOSTIC WORKSHEET". Continue Road Test.
NO >> GO TO 5.

5. CHECK SHIFT SHOCK
1. Apply foot brake.
2. Move selector lever to R position.
Is there large shock when changing from N to R position?
YES >> Mark the box CVT-171, "Large Shock N -> R Position" on the CVT-32, "DIAGNOSTIC WORKSHEET". Continue Road Test.
NO >> GO TO 6.

6. CHECK R POSITION FUNCTION
Release foot brake for several seconds.
Does vehicle creep backward when foot brake is released?
YES >> GO TO 7.
NO >> Mark the box CVT-172, "Vehicle Does Not Creep Backward in R Position" on the CVT-32, "DIAGNOSTIC WORKSHEET". Continue Road Test.

7. CHECK D, L POSITIONS FUNCTION
Move selector lever to D and L positions and check if vehicle creeps forward.
Does vehicle creep forward in all positions?
YES >> Go to CVT-44, "Cruise Test". Cruise Test
NO >> Stop Road Test. Mark the box CVT-173, "Vehicle Does Not Creep Forward in D or L Position" on the CVT-32, "DIAGNOSTIC WORKSHEET". Go to CVT-173, "Vehicle Does Not Creep Forward in D or L Position". Vehicle Does Not Creep Forward In D or L Position