Cruise Test

Cruise Test
1. CHECK VEHICLE SPEED WHEN SHIFTING GEARS - PART 1
1. Drive vehicle for approximately 10 minutes to warm engine oil and CVT fluid up to operating temperature.
CVT fluid operating temperature: 50 - 80°C (122 - 176°F)
2. Park vehicle on flat surface.
3. Move selector lever to P position.
4. Start engine.
5. Move selector lever to L position.

6. Accelerate vehicle to 2/8-way throttle depressing accelerator pedal constantly.
Read vehicle speed and engine speed. Refer to CVT-48,
"Vehicle Speed When Shifting Gears". Vehicle Speed When Shifting Gears
OK or NG
OK >> GO TO 2.
NG >> Mark the box CVT-174, "Vehicle Speed Does Not Change in L Position" on the CVT-32, "DIAGNOSTIC WORKSHEET". Example of Diagnosis Sheet
Continue Road Test.

2. CHECK VEHICLE SPEED WHEN SHIFTING GEARS - PART 2
1. Park vehicle on flat surface.
2. Move selector lever to D position.

3. Accelerate vehicle to full depression depressing accelerator pedal constantly.
Read vehicle speed and engine speed. Refer to CVT-48,
"Vehicle Speed When Shifting Gears". Vehicle Speed When Shifting Gears
OK or NG
OK >> GO TO 3. (With manual mode)
OK >> GO TO 7. (Without manual mode)
NG >> Mark the box CVT-177, "CVT Does Not Shift in Manual Mode" on the CVT-32, "DIAGNOSTIC WORKSHEET". Continue Road Test.

3. CHECK MANUAL MODE FUNCTION
Move to manual mode from "D" position.
Does it switch to manual mode?
YES >> GO TO 4.
NO >> Mark the box CVT-177, "Cannot Be Changed to Manual Mode" on the CVT-32, "DIAGNOSTIC WORKSHEET". Continue Road Test.

4. CHECK SHIFT-UP FUNCTION
During manual mode driving, is upshift from M1 -> M2 -> M3 -> M4 -> M5 -> M6 performed?
Read the gear position. Refer to CVT-57, "DATA MONITOR MODE". Data Monitor Mode
Is upshifting correctly performed?
YES >> GO TO 5.
NO >> Mark the box CVT-177, "CVT Does Not Shift in Manual Mode" on the CVT-32, "DIAGNOSTIC WORKSHEET". Example of Diagnosis Sheet
Continue Road Test.

5. CHECK SHIFT-DOWN FUNCTION
During manual mode driving, is downshift from M6 -> M5 -> M4 -> M3 -> M2 -> M1 performed?
Read the gear position. Refer to CVT-57, "DATA MONITOR MODE". Data Monitor Mode
Is downshifting correctly performed?
YES >> GO TO 6.
NO >> Mark the box CVT-177, "CVT Does Not Shift in Manual Mode" on the CVT-32, "DIAGNOSTIC WORKSHEET". Example of Diagnosis Sheet
Continue Road Test.

6. CHECK ENGINE BRAKE FUNCTION
Check engine brake.
Does engine braking effectively reduce speed in M1 position?
YES >>
1. Stop the vehicle.
2. Perform self-diagnosis. Refer to CVT-54, "SELF-DIAGNOSTIC RESULT MODE". With Manufacturer's Scan Tool
NO >> Mark the box of CVT-179, "Vehicle Does Not Decelerate by Engine Brake" on the CVT-32, "DIAGNOSTIC WORKSHEET". Example of Diagnosis Sheet
Then continue trouble diagnosis.

7. CHECK VEHICLE SPEED WHEN SHIFTING GEARS - PART 2
1. Park vehicle on flat surface.
2. Move selector lever to D position.
3. Push overdrive control switch. (O/D OFF indicator lamp is on.)

4. Accelerate vehicle to 2/8-way throttle depressing accelerator pedal constantly.
Read vehicle speed and engine speed. Refer to CVT-48, "Vehicle Speed When Shifting Gears". Vehicle Speed When Shifting Gears
OK or NG
OK >> GO TO 8.
NG >> Mark the box CVT-175, "Vehicle Speed Does Not Change in overdrive-off mode" on the CVT-32, "DIAGNOSTIC WORKSHEET". Continue Road Test.

8. CHECK VEHICLE SPEED WHEN SHIFTING GEARS - PART 3
1. Park vehicle on flat surface.
2. Move selector lever to D position.
3. Push overdrive control switch. (O/D OFF indicator lamp is off.)

4. Accelerate vehicle to 2/8 way throttle depressing accelerator pedal constantly.
Read vehicle speed and engine speed. Refer to CVT-48, "Vehicle Speed When Shifting Gears". Vehicle Speed When Shifting Gears
OK or NG
OK >> GO TO 9.
NG >> Mark the box CVT-176, "Vehicle Speed Does Not Change in D Position" on the CVT-32, "DIAGNOSTIC WORKSHEET". Example of Diagnosis Sheet
Continue Road Test.

9. CHECK VEHICLE SPEED WHEN SHIFTING GEARS - PART 4
1. Park vehicle on flat surface.
2. Move selector lever to L position.

3. Accelerate vehicle to full depression depressing accelerator pedal constantly.
Read vehicle speed and engine speed. Refer to CVT-48, "Vehicle Speed When Shifting Gears". Vehicle Speed When Shifting Gears
OK or NG
OK >> GO TO 10.
NG >> Mark the box CVT-174, "Vehicle Speed Does Not Change in L Position" on the CVT-32, "DIAGNOSTIC WORKSHEET". Example of Diagnosis Sheet
Continue Road Test.

10. CHECK VEHICLE SPEED WHEN SHIFTING GEARS - PART 5
1. Park vehicle on flat surface.
2. Move selector lever to D position.
3. Push overdrive control switch. (O/D OFF indicator lamp is on.)

4. Accelerate vehicle to full depression depressing accelerator pedal constantly.
Read vehicle speed and engine speed. Refer to CVT-48, "Vehicle Speed When Shifting Gears". Vehicle Speed When Shifting Gears
OK or NG
OK >> GO TO 12.
NG >> Mark the box CVT-176, "Vehicle Speed Does Not Change in D Position" on the CVT-32, "DIAGNOSTIC WORKSHEET". Example of Diagnosis Sheet
Continue Road Test.

12. CHECK ENGINE BRAKE FUNCTION - PART 1
1. Release accelerator pedal.
2. Check engine brake. (O/D OFF indicator lamp is off.)
Does engine braking effectively reduce speed in D position?
YES >> GO TO 13.
NO >> Mark the box CVT-179, "Vehicle Does Not Decelerate by Engine Brake" on the CVT-32, "DIAGNOSTIC WORKSHEET". Example of Diagnosis Sheet
Continue Road Test.

13. CHECK ENGINE BRAKE FUNCTION - PART 2
1. Push overdrive control switch. (O/D OFF indicator lamp is on.)
2. Check engine brake.
Does engine braking effectively reduce speed in D position?
YES >> GO TO 14.
NO >> Mark the box CVT-179, "Vehicle Does Not Decelerate by Engine Brake" on the CVT-32, "DIAGNOSTIC WORKSHEET". Example of Diagnosis Sheet
Continue Road Test.

14. CHECK ENGINE BRAKE FUNCTION - PART 3
1. Move selector lever to L position.
2. Check engine brake.
Does engine braking effectively reduce speed in L position?
YES >>
1. Stop the vehicle.
2. Perform self-diagnosis. Refer to CVT-54, "SELF-DIAGNOSTIC RESULT MODE". With Manufacturer's Scan Tool
NO >> Mark the box CVT-179, "Vehicle Does Not Decelerate by Engine Brake" on the CVT-32, "DIAGNOSTIC WORKSHEET". Then continue trouble diagnosis.