Replacing Radial Shaft Seal for Drive Shaft (AISIN)

24 21 515 - Replacing radial shaft seal for drive shaft (AISIN)





Special tools required:
- 00 5 010 00 5 010 Universal Puller
- 24 4 250





Note:
Transmission Removing and Installing Transmission (AISIN) removed!

Remove torque converter Service and Repair.





Pull off radial shaft seal with special tool 00 5 010 00 5 010 Universal Puller.

Important!
Important - Do not damage bearing on oil pump.





Installation:
Clean sealing surface.

Lubricate sealing lip of shaft seal with clean transmission oil.

Push radial shaft seal (1) onto special tool 24 4 250 and drive firmly home.

Important!
Do not damage shaft seal (1).