Roof Opening Panel Glass

ROOF OPENING PANEL GLASS

Exploded View

Part 1:

Part 2:

Removal and Installation
1. Remove the roof opening panel trim.
2. Operate the roof opening panel glass to the flush position.
3. Remove the 4 roof opening panel glass screws.
- To install, tighten to 4 Nm (35 lb-in).

4. From outside the vehicle, lift the roof opening panel glass from the vehicle.
5. To install, reverse the removal procedure.
- Align the roof opening panel glass. For additional information, refer to Roof Opening Panel Alignment. Adjustments