Sunroof / Moonroof: Adjustments

ROOF OPENING PANEL ALIGNMENT

1. Swing the LH and the RH roof opening panel covers rearward.







2. With the roof opening panel fully-closed, loosen the 4 roof opening panel glass screws.
3. Adjust the front of the roof opening panel glass to specification.







4. Adjust the rear of the roof opening panel glass to specification.







5. Tighten the 4 roof opening panel glass screws.
- Tighten to 4 Nm (35 lb-in).

6. NOTE: Make sure to align the roof opening panel covers to the snap retainer prior to positioning into place.

Install the LH and the RH roof opening panel covers.







7. Initialize the roof panel opening motor. For additional information, refer to Roof Opening Panel Motor Initialization. Programming and Relearning