Accelerator Pedal Limiter

Accelerator Pedal Limiter

NOTE: If unable to set both accelerator cable (9A758) deflection and wide open throttle position, the accelerator travel needs to be adjusted.


1. Use a 17mm wrench to loosen the locknut on the limiter bolt.

2. Adjust the limiter, using a 14mm wrench, turn the bolt in to increase pedal travel, out to decrease travel.

3. While holding the limiter nut with the 14mm wrench, tighten the locknut using the 17mm wrench.

4. Check the accelerator cable deflection and wide open throttle position, see Accelerator Pedal/ Adjustments. [1][2]Free Play AdjustmentsAdjust, if necessary.