HE84 - Check EVR Circuit For Open In Harness

- Key Off.

- EVR solenoid disconnected.

- Breakout box installed, PCM disconnected.

- Measure resistance between Test Pin 47 (EVR) and EVR circuit at the EVR solenoid vehicle harness connector.

- Is resistance less than 5.0 ohms?

YES -- RECONNECT EVR solenoid. GO to HE85. HE85 - Check EVR Vacuum Output By Grounding EVR Circuit

NO -- SERVICE open in EVR circuit. RECONNECT all components. Complete PCM reset to clear DTCs. Clearing Diagnostic Trouble Codes

Rerun quick test. Diagnostic Subroutines (DSR) - Extracting Codes