Removal

1UR-FSE INTAKE: INTAKE AIR CONTROL VALVE ACTUATOR: REMOVAL

1. REMOVE COWL TOP VENTILATOR LOUVER RH Removal

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

NOTICE:
After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.

3. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

4. REMOVE INTAKE AIR CONTROL VALVE ACTUATOR





(a) Disconnect the intake air control valve actuator connector.

(b) Remove the nut and disconnect the actuator rod.

HINT
When loosening the nut, hold the actuator rod in place so that it does not move.

(c) Remove the 2 bolts. Then remove the intake air control valve actuator from the intake manifold.