Installation

1UR-FSE LUBRICATION: OIL LEVEL SENSOR (for AWD): INSTALLATION

1. INSTALL ENGINE OIL LEVEL SENSOR

(a) Install a new gasket to the engine oil level sensor.





(b) Insert the engine oil level sensor into the oil pan and rotate it 180°.

(c) Install the engine oil level sensor with the 4 bolts.





Torque : 7.0 Nm (71 kgf-cm, 62 in-lbf)

(d) Connect the engine oil level sensor connector.

2. ADD ENGINE OIL Replacement

3. INSPECT FOR ENGINE OIL LEAK Installation

4. CHECK ENGINE OIL LEVEL Testing and Inspection

5. INSTALL FRONT SUSPENSION MEMBER PROTECTOR LOWER Installation

6. INSTALL NO. 1 ENGINE UNDER COVER Service and Repair

7. INSTALL FRONT WHEEL OPENING EXTENSION PAD LH Installation

8. INSTALL FRONT WHEEL OPENING EXTENSION PAD RH Installation

9. INSTALL NO. 2 ENGINE UNDER COVER Installation

10. INSTALL FRONT CENTER FLOOR COVER Installation