Installation

PRE-COLLISION: DRIVER MONITOR ECU: INSTALLATION

1. INSTALL DRIVER MONITOR ECU





(a) Install the ECU with the 2 nuts.

(b) Connect the connectors.

2. INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY Installation

3. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY Installation

4. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation

5. INSTALL NO. 1 INSTRUMENT CLUSTER MOULDING Installation

6. INSTALL INSTRUMENT SIDE PANEL LH Installation

7. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Installation

8. INSTALL INSTRUMENT PANEL FINISH PANEL END LH Installation

9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

10. INSTALL COWL TOP VENTILATOR LOUVER RH Installation

11. CHECK SRS WARNING LIGHT

(a) Check the SRS warning light Diagnosis System.