Replacement
A760E AUTOMATIC TRANSMISSION / TRANSAXLE: EXTENSION HOUSING REAR OIL SEAL: REPLACEMENT
1. REMOVE PROPELLER SHAFT WITH CENTER BEARING ASSEMBLY
HINT
Removal
2. DRAIN AUTOMATIC TRANSMISSION FLUID
(a) Remove the drain plug and gasket, and drain the ATF.
Text in Illustration
(b) Install a new gasket and the drain plug.
Torque : 20 Nm (204 kgf-cm, 15 ft-lbf)
3. REMOVE AUTOMATIC TRANSMISSION FLANGE YOKE ASSEMBLY
(a) Using SST and a hammer, loosen the staked part of the nut.
SST : 09930-00010
HINT
Move the shift lever to P.
(b) Attach SST.
SST : 09330-00021
SST : 09950-30012
09955-03040
(c) Using SST and a 30 mm socket wrench, remove the lock nut.
Text in Illustration
(d) Remove SST.
(e) Tap the output automatic transmission flange yoke assembly with a plastic hammer to remove it.
(f) Using a screwdriver, remove the oil seal from the automatic transmission flange yoke assembly.
Text in Illustration
4. REMOVE AUTOMATIC TRANSMISSION EXTENSION HOUSING OIL SEAL
(a) Using SST, remove the oil seal.
SST : 09308-00010
5. INSTALL AUTOMATIC TRANSMISSION EXTENSION HOUSING OIL SEAL
(a) Coat the lip of a new oil seal with MP grease.
(b) Using SST and a hammer, drive in the oil seal with the lip facing inside of the automatic transmission.
SST : 09316-60011
09316-00011
09316-00051
Oil seal depth from flat end:
1.8 to 2.2 mm (0.0709 to 0.0866 in.)
6. INSTALL AUTOMATIC TRANSMISSION FLANGE YOKE ASSEMBLY
(a) Using SST and a hammer, drive in a new oil seal.
SST : 09517-36010
Oil seal drive in depth:
0 to 0.3 mm (0 to 0.0118 in.)
(b) Install the automatic transmission flange yoke assembly.
(c) Attach SST.
SST : 09330-00021
SST : 09950-30012
09955-03040
Text in Illustration
(d) Using SST and a 30 mm socket wrench, install and tighten a new lock nut.
Torque : 126 Nm (1285 kgf-cm, 93 ft-lbf)
(e) Using a chisel and hammer, securely stake the lock nut.
7. INSTALL PROPELLER SHAFT WITH CENTER BEARING ASSEMBLY
HINT
Installation
8. ADD AUTOMATIC TRANSMISSION FLUID
HINT
Service and Repair