Removal

DIFFERENTIAL: DIFFERENTIAL CARRIER ASSEMBLY (for 2GR-FSE): REMOVAL

1. REMOVE REAR WHEELS

2. DRAIN DIFFERENTIAL OIL

(a) Using a hexagon wrench (10 mm), remove the differential filler plug and gasket.

(b) Using a hexagon wrench (10 mm), remove the differential drain plug and gasket, and drain the oil.

3. REMOVE TAIL EXHAUST PIPE ASSEMBLY

Removal

4. REMOVE PROPELLER SHAFT WITH CENTER BEARING ASSEMBLY

for 2WD: Removal

for 4WD: Removal

5. REMOVE REAR DRIVE SHAFT ASSEMBLY LH

Removal

6. REMOVE REAR DRIVE SHAFT ASSEMBLY RH

HINT
Removal procedure of the RH side is the same as that of the LH side.

7. REMOVE REAR STABILIZER BAR

Removal

8. REMOVE REAR DIFFERENTIAL CARRIER ASSEMBLY

(a) Support the differential carrier with a jack.





NOTICE:
Do not drop the differential carrier.

(b) Using a hexagon wrench (12 mm), remove the 3 hexagon bolts.

(c) Remove the 2 bolts, 2 differential mount stoppers and differential carrier rear.