Replacement

RA62 MANUAL TRANSMISSION / TRANSAXLE: MANUAL TRANSMISSION EXTENSION HOUSING OIL SEAL: REPLACEMENT

1. DRAIN MANUAL TRANSMISSION OIL Replacement

2. REMOVE PROPELLER SHAFT WITH CENTER BEARING ASSEMBLY

Removal.

3. REMOVE MANUAL TRANSMISSION EXTENSION HOUSING OIL SEAL

(a) Using SST, remove the oil seal.





SST : 09308-00010

4. INSTALL MANUAL TRANSMISSION EXTENSION HOUSING OIL SEAL

(a) Using SST and a hammer, install a new oil seal to the extension housing.





SST : 09325-20010

Installation depth:

-0.5 to 0.5 mm (-0.0197 to 0.0197 in.)

(b) Coat the lip of the oil seal with MP grease.

5. INSTALL PROPELLER SHAFT WITH CENTER BEARING ASSEMBLY

Installation.

6. ADD MANUAL TRANSMISSION OIL Replacement

7. INSPECT FOR EXHAUST GAS LEAK

8. INSPECT FOR OIL LEAK