Installation

SEAT BELT: CHILD RESTRAINT SEAT TETHER ANCHOR: INSTALLATION

1. INSTALL CHILD RESTRAINT SEAT TETHER ANCHOR BRACKET

(a) Install the 3 child restraint seat tether anchor brackets with the 3 bolts.

Torque : 21 Nm (214 kgf-cm, 16 ft-lbf)

2. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (w/o Rear Sunshade) Installation

3. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Rear Sunshade) Installation

4. INSTALL CENTER STOP LIGHT SET (w/ Rear Spoiler) Installation

5. INSTALL ROOF SIDE INNER GARNISH LH Installation

6. INSTALL ROOF SIDE INNER GARNISH RH Installation

7. INSTALL REAR SEAT SIDE GARNISH LH Installation

8. INSTALL REAR SEAT SIDE GARNISH RH Installation

9. INSTALL REAR DOOR SCUFF PLATE LH Installation

10. INSTALL REAR DOOR SCUFF PLATE RH Installation

11. INSTALL BENCH TYPE REAR SEATBACK ASSEMBLY Installation

12. INSTALL REAR SEAT CENTER HEADREST ASSEMBLY

13. INSTALL REAR SEAT HEADREST ASSEMBLY

14. INSTALL BENCH TYPE REAR SEAT CUSHION ASSEMBLY Installation