Removal

AIR CONDITIONING: BLOWER UNIT: REMOVAL

1. REMOVE COOL AIR INTAKE DUCT SEAL Removal

2. REMOVE ENGINE ROOM SIDE COVER LH Removal

3. REMOVE FRONT PILLAR TO FRONT SIDE SEAL SUB-ASSEMBLY LH Removal

4. REMOVE FRONT PILLAR TO FRONT SIDE SEAL SUB-ASSEMBLY RH Removal

5. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH Removal

6. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH Removal

7. REMOVE FRONT FENDER TO COWL SIDE SEAL LH Removal

8. REMOVE FRONT FENDER TO COWL SIDE SEAL RH Removal

9. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY Removal

10. REMOVE FRONT WIPER MOTOR AND LINK ASSEMBLY Removal

11. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

12. REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

(a) Remove the instrument panel safety pad sub-assembly Removal.

13. REMOVE STEERING COLUMN ASSEMBLY

for 2GR-FSE Removal

for 1UR-FSE Removal

14. REMOVE INSTRUMENT PANEL REINFORCEMENT ASSEMBLY Removal

15. REMOVE NO. 2 AIR DUCT Removal

16. REMOVE AIR CONDITIONING AMPLIFIER ASSEMBLY Removal

17. REMOVE BLOWER ASSEMBLY

(a) Disconnect the connector.





(b) Remove the screw and nut.

(c) Detach the 2 claws and remove the blower.