Removal

2ZR-FXE ENGINE CONTROL: AIR FUEL RATIO SENSOR: REMOVAL

1. REMOVE WINDSHIELD WIPER MOTOR AND LINK

Removal

2. REMOVE NO. 1 HEATER AIR DUCT SPLASH SHIELD SEAL Removal

3. REMOVE NO. 2 HEATER AIR DUCT SPLASH SHIELD SEAL Removal

4. REMOVE COWL BODY MOUNTING REINFORCEMENT LH Removal

5. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY Removal

6. REMOVE NO. 2 CYLINDER HEAD COVER Removal

7. REMOVE AIR FUEL RATIO SENSOR

(a) Disconnect the air fuel ratio sensor connector and clamp.





(b) Using SST, remove the air fuel ratio sensor.





SST : 09224-00010