Removal

WIPER / WASHER: FRONT WIPER MOTOR: REMOVAL

1. REMOVE FRONT WIPER ARM HEAD CAP

(a) Using a screwdriver, disengage the 3 claws and remove the front wiper arm head cap.

Text in Illustration

HINT
* Tape the screwdriver tip before use.
* Use the same procedure for the RH side and LH side.

2. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH

(a) Remove the nut and the front wiper arm and blade assembly LH.

3. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH

(a) Remove the nut and the front wiper arm and blade assembly RH.

4. REMOVE FRONT NO. 2 SIDE PANEL PROTECTOR LH

(a) Disengage the clip and guide, and remove the front No. 2 side panel protector LH.

Text in Illustration

5. REMOVE FRONT NO. 2 SIDE PANEL PROTECTOR RH

HINT
Use the same procedure as for the LH side.

6. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY

(a) Remove the 2 clips.

(b) Disengage the 6 claws and guide as shown in the illustration.

7. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

(a) Operate the wiper and stop the windshield wiper motor at the automatic stop position.

(b) Disengage the 4 clamps.

(c) Remove the 2 bolts.

(d) Disengage the motor grommet and remove the windshield wiper motor and link assembly as shown in the illustration.

Text in Illustration

NOTICE:
Be careful not to damage the windshield when removing the windshield wiper motor and link assembly.

(e) Disconnect the connector.

8. REMOVE FRONT WIPER CRANK SUB-ASSEMBLY

(a) Using a screwdriver, separate the No. 1 rod from the crank arm pivot of the front wiper crank sub-assembly as shown in the illustration.

Text in Illustration

HINT
Tape the screwdriver tip before use.

(b) Remove the nut and the front wiper crank sub-assembly.

9. REMOVE WINDSHIELD WIPER MOTOR ASSEMBLY

(a) Remove the 3 bolts and the windshield wiper motor assembly.