Installation

PARK ASSIST / MONITORING: PARKING ASSIST ECU (w/ Advanced Parking Guidance System): INSTALLATION

1. INSTALL PARKING ASSIST ECU

(a) Install the parking assist ECU to the suspension control ECU with the nut and bolt.





NOTICE:
* Avoid any impact to the parking assist ECU.
* Do not drop the ECU. If it is dropped, replace it with a new one.
(b) Install the parking assist ECU with the nut and bolt.





(c) Connect the each connectors.

2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY Installation

3. INSTALL NO. 2 INSTRUMENT CLUSTER MOULDING Installation

4. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY Installation

5. INSTALL INSTRUMENT PANEL LOWER Installation

6. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation

7. INSTALL INSTRUMENT SIDE PANEL RH Installation

8. INSTALL INSTRUMENT PANEL FINISH PANEL END RH Installation

9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some system need to be initialized after the cable is reconnected Testing and Inspection.

10. INSTALL COWL TOP VENTILATOR LOUVER RH Installation

11. CHECK SRS WARNING LIGHT

(a) Check the SRS warning light Diagnosis System.