Installation

PARK ASSIST / MONITORING: CLEARANCE WARNING ECU (w/o Advanced Parking Guidance System): INSTALLATION

1. INSTALL CLEARANCE WARNING ECU

(a) Install the clearance warning ECU to the suspension control ECU with the nut.





NOTICE:
* Avoid any impact to the clearance warning ECU.
* Do not drop the ECU. If it is dropped, replace it with a new one.
(b) Install the clearance warning ECU with the nut and bolt.





(c) Connect the each connectors.

2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY Installation

3. INSTALL NO. 2 INSTRUMENT CLUSTER MOULDING Installation

4. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY Installation

5. INSTALL INSTRUMENT PANEL LOWER Installation

6. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation

7. INSTALL INSTRUMENT SIDE PANEL RH Installation

8. INSTALL INSTRUMENT PANEL FINISH PANEL END RH





(a) Attach the 8 clips and claw to install the instrument panel finish panel end.

9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some system need to be initialized after the cable is reconnected Testing and Inspection.

10. INSTALL COWL TOP VENTILATOR LOUVER RH Installation

11. CHECK SRS WARNING LIGHT

(a) Check the SRS warning light Diagnosis System.