Removal

BRAKE CONTROL: STEERING ANGLE SENSOR: REMOVAL

REMOVAL

1. FOLLOW PRECAUTION
(a) Follow the PRECAUTION Service Precautions.
2. SET RADIO RECEIVER ASSEMBLY TO SHIPMENT MODE Removal
3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

4. PLACE FRONT WHEELS FACING STRAIGHT AHEAD
5. REMOVE SWITCH AND VOLUME CASE
6. REMOVE STEERING PAD SWITCH MODULATOR
7. REMOVE STEERING PAD ASSEMBLY Removal
8. REMOVE STEERING WHEEL ASSEMBLY Removal
9. REMOVE SPIRAL CABLE SUB-ASSEMBLY Removal
10. REMOVE TURN SIGNAL SWITCH ASSEMBLY
11. REMOVE STEERING SENSOR