Removal

SUPPLEMENTAL RESTRAINT SYSTEM: SPIRAL CABLE: REMOVAL

REMOVAL
CAUTION:
Be sure to read the precautionary notices concerning the SRS airbag system before servicing it Service Precautions.

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE NO. 2 STEERING WHEEL COVER LOWER
3. REMOVE SWITCH AND VOLUME CASE Removal
4. REMOVE STEERING PAD SWITCH MODULATOR Removal
5. REMOVE STEERING PAD ASSEMBLY Removal
6. PLACE FRONT WHEELS FACING STRAIGHT AHEAD
7. REMOVE STEERING WHEEL ASSEMBLY Removal
8. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Removal
9. REMOVE STEERING COLUMN COVER Removal
10. REMOVE SPIRAL CABLE SUB-ASSEMBLY





(a) Disconnect the airbag connectors.
NOTE:
When handling the airbag connector, do not damage the airbag wire harness.

(b) Detach the 3 claws and remove the spiral cable.