Removal

PARKING BRAKE: PARKING BRAKE PEDAL: REMOVAL

REMOVAL

1. FOLLOW PRECAUTION
(a) Follow the precaution Service Precautions.
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

3. REMOVE DOOR SCUFF PLATE ASSEMBLY LH Removal
4. REMOVE FRONT DOOR OPENING TRIM COVER LH Removal
5. REMOVE NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY Removal
6. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIR BAG ASSEMBLY Removal
7. REMOVE PARKING BRAKE CONTROL PEDAL ASSEMBLY
(a) Disconnect the parking brake switch connector.
(b) Remove the 2 bolts, and then disconnect the parking brake release cable.





(c) Remove the lock nut and adjusting nut.
(d) Remove the clip.





(e) Remove the bolt and 2 nuts, pull out the No. 1 parking brake cable and then remove the control pedal.
8. REMOVE PARKING BRAKE RELEASE CABLE SUB-ASSEMBLY