Removal

SUPPLEMENTAL RESTRAINT SYSTEM: DRIVER SIDE KNEE AIRBAG ASSEMBLY: REMOVAL

REMOVAL

1. DISCONNECT BATTERY NEGATIVE TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE DOOR SCUFF PLATE ASSEMBLY LH Removal
3. REMOVE FRONT DOOR OPENING TRIM COVER LH Removal
4. REMOVE NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY Removal
5. REMOVE DRIVER SIDE KNEE AIRBAG ASSEMBLY





(a) Remove the 4 bolts and front passenger airbag.
(b) Disconnect the connector.
NOTE:
When handling the airbag connector, take care not to damage the airbag wire harness.