Removal

AUDIO / VISUAL: PILLAR SPEAKER (for Quarter): REMOVAL

REMOVAL
HINT:
- Use the same procedures for the LH side and RH side.
- The procedures listed below are for the LH side.

1. REMOVE COWL TOP VENTILATOR LOUVER RH Removal
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
NOTE:
After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.

3. REMOVE REAR DOOR SCUFF PLATE LH
(a) for Standard Body:
(1) Remove the rear door scuff plate LH Removal.
(b) for Long Body:
(1) Remove the rear door scuff plate LH Removal.
4. REMOVE REAR SEAT ASSEMBLY
(a) for Power Seat:
(1) Remove the rear seat Removal.
(b) for Ottoman:
(1) Remove the rear seat Removal.
(c) for Fixed Seat:
(1) Remove the rear seat Removal.
5. REMOVE REAR SEAT SIDE GARNISH LH Removal
6. REMOVE ROOF SIDE GARNISH INNER LH Removal





7. REMOVE REAR HEADER SPEAKER ASSEMBLY (for 19 Speakers)
(a) Remove the 2 bolts.
(b) Detach the clip, disconnect the speaker connector and remove the speaker.
NOTE:
Do not touch the cone part of the speaker.