Removal

AUDIO / VISUAL: AUDIO AND REAR AIR CONDITIONER CONTROL SWITCH (for Power Seat): REMOVAL

REMOVAL

1. REMOVE COWL TOP VENTILATOR LOUVER RH Removal
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
NOTE:
After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.

3. REMOVE REAR SEAT CUSHION ASSEMBLY CENTER Removal
4. REMOVE REAR SEATBACK ASSEMBLY CENTER Removal
5. REMOVE REAR SEAT CENTER ARMREST ASSEMBLY Disassembly
6. REMOVE NO. 1 REAR SEAT CENTER ARMREST PANEL Disassembly





7. REMOVE REAR POWER SEAT MODULE SWITCH
(a) Remove the 4 screws and rear power seat module.