Installation

THEFT DETERRENT: ENGINE HOOD COURTESY SWITCH: INSTALLATION

INSTALLATION

1. INSTALL HOOD LOCK ASSEMBLY Installation
2. INSTALL FRONT FENDER PROTECTOR UPPER LH Installation
3. INSTALL HOOD LOCK CONTROL CABLE COVER Installation
4. INSTALL MILLIMETER WAVE RADAR SENSOR ASSEMBLY Installation
5. ADJUST MILLIMETER WAVE RADAR SENSOR ASSEMBLY Adjustments
6. INSTALL RADIATOR GRILLE ASSEMBLY Installation
7. INSTALL COOL AIR INTAKE DUCT SEAL Installation
8. INSTALL AIR CLEANER INLET COVER SUB-ASSEMBLY Installation
9. INSTALL ENGINE ROOM SIDE COVER RH Installation
10. INSTALL ENGINE ROOM SIDE COVER LH Installation
11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
12. INSTALL COWL TOP VENTILATOR LOUVER RH Installation
13. PERFORM INITIALIZATION
(a) Perform initialization Repair Instruction - Initialization.
NOTE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.