Installation

EXTERIOR: RADIATOR GRILLE: INSTALLATION

INSTALLATION





1. INSTALL RADIATOR GRILLE ASSEMBLY
(a) Attach the 7 claws to install the radiator grille.
(b) Install the bolt.
Torque: 5.5 Nm (56 kgf-cm, 49 in-lbf)
(c) Install the 2 grommets and 2 clips, and rotate the 2 clips as shown in the illustration.
2. INSTALL COOL AIR INTAKE DUCT SEAL Installation
3. INSTALL AIR CLEANER INLET COVER SUB-ASSEMBLY Installation
4. INSTALL ENGINE ROOM SIDE COVER LH Installation
5. INSTALL ENGINE ROOM SIDE COVER RH Installation