Removal

AIR CONDITIONING: ROOM TEMPERATURE SENSOR: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY
CAUTION:
Wait for 90 seconds after disconnecting the cable to prevent airbag deployment. Service Precautions

2. REMOVE FRONT DOOR SCUFF PLATE LH (w/o Illumination) Removal
3. REMOVE FRONT DOOR SCUFF PLATE LH (w/ Illumination) Removal
4. REMOVE FRONT DOOR OPENING TRIM COVER LH Installation
5. REMOVE SIDE INSTRUMENT PANEL LH Removal
6. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal
7. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Removal
8. REMOVE DRIVER SIDE KNEE AIRBAG ASSEMBLY Removal
9. REMOVE ROOM TEMPERATURE SENSOR





(a) Disconnect the connector and air hose.
(b) Detach the claw and remove the sensor.