Removal

SUPPLEMENTAL RESTRAINT SYSTEM: DRIVER SIDE KNEE AIRBAG ASSEMBLY: REMOVAL

REMOVAL

1. PRECAUTION
CAUTION:
Be sure to read "PRECAUTION" thoroughly before servicing Service Precautions.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTE:
Wait for 90 seconds after disconnecting the cable to prevent airbag deployment.

3. REMOVE FRONT DOOR SCUFF PLATE (w/o Illumination) Removal
4. REMOVE FRONT DOOR SCUFF PLATE (w/ Illumination) Removal
5. REMOVE FRONT DOOR OPENING TRIM COVER Removal
6. REMOVE INSTRUMENT SIDE PANEL Removal
7. REMOVE NO.1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal
8. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Removal
9. REMOVE DRIVER SIDE KNEE AIRBAG ASSEMBLY





(a) Remove the 4 bolts and driver side knee airbag assembly.
(b) Disconnect the connector.
NOTE:
When handling the airbag connector, take care not to damage the airbag wire harness.