Installation

CELLULAR COMMUNICATION: MAYDAY ECU: INSTALLATION

INSTALLATION
HINT: A bolt without a torque specification is shown in the standard bolt chart Standard Bolt - Specified Torque For Standard Bolts.





1. INSTALL MOBILEPHONE BRACKET
(a) Install the 2 mobilephone brackets with the 4 bolts.
2. INSTALL MAYDAY ECU






(a) Install the ECU with the nut.
(b) Connect the 4 connectors and 2 clamps.
3. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH Installation

4. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY RH Installation

5. INSTALL REAR FLOOR FINISH PLATE Installation

6. INSTALL LUGGAGE COMPARTMENT TRIM COVER FRONT Installation

7. INSTALL LUGGAGE COMPARTMENT NO. 2 TRIM HOOK (w/o Rear Cooler) Installation

8. INSTALL LUGGAGE COMPARTMENT NO. 1 LIGHT ASSEMBLY Installation

9. INSTALL DECK TRIM SIDE BOARD LH Installation

10. INSTALL DECK TRIM SIDE BOARD RH Installation

11. INSTALL ROPE HOOK Installation

12. INSTALL ROPE HOOK ASSEMBLY Installation

13. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY Installation

14. INSTALL NO. 1 COOLER COVER Installation

15. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
16. INSTALL COWL TOP VENTILATOR LOUVER RH Installation

17. PERFORM INITIALIZATION
(a) Perform initialization Repair Instruction - Initialization.
NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.

18. CHECK SRS WARNING LIGHT
(a) Check the SRS warning light Diagnosis System.
19. PERFORM REGISTRATION
(a) Perform registration Programming and Relearning.
NOTE: When replacing the mayday battery or the mayday ECU assembly (together with mayday battery), perform registration.