Installation
1UR-FSE EMISSION CONTROL: PCV VALVE: INSTALLATION
INSTALLATION
1. INSTALL PCV VALVE
(a) Apply a light coat of engine oil to the O-ring, and install it to the valve.
(b) Install the PCV valve.
Torque: 5.0 Nm (51 kgf-cm, 44 in-lbf)
HINT:
- When reusing the PCV valve, inspect the O-ring.
- If the O-ring has scratches or cuts, replace the PCV valve.
2. INSTALL PCV VALVE HOSE
(a) Install the hose to the PCV valve.
3. INSTALL INTAKE MANIFOLD
(a) Install the intake manifold Installation.
4. INSTALL COWL TOP VENTILATOR LOUVER RH Installation
5. PERFORM INITIALIZATION
(a) Perform initialization Repair Instruction - Initialization.
NOTE: Certain systems need to be initialized after reconnecting the cable to the negative (-) battery terminal.