Installation

BRAKE CONTROL: SKID CONTROL BUZZER:

INSTALLATION

1. INSTALL SKID CONTROL BUZZER ASSEMBLY






(a) Attach the claw and install the skid control buzzer assembly.
(b) Connect the skid control buzzer assembly connector.
2. INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY Installation

3. INSTALL LOWER INSTRUMENT FINISH PANEL SUB-ASSEMBLY Installation

4. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation

5. INSTALL SIDE INSTRUMENT PANEL LH Installation

6. CONNECT BATTERY NEGATIVE TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Repair Instruction - Initialization

7. INSPECT SRS WARNING LIGHT Diagnosis System.