Installation

STEERING COLUMN: STEERING WHEEL: INSTALLATION

1. INSTALL STEERING PAD ATTACHING SCREW

(a) Install the 2 steering wheel pad attaching screws to the lower steering wheel boss cover.





2. INSTALL LOWER STEERING WHEEL BOSS COVER

(a) Engage the 2 claws to install the lower steering wheel boss cover to the steering wheel sub-assembly.





(b) Engage the 2 pins.

3. INSTALL CRUISE CONTROL SWITCH WIRE

4. INSTALL CRUISE CONTROL MAIN SWITCH Installation

5. INSTALL STEERING PAD SWITCH ASSEMBLY

(a) Engage the 2 claws and pin to install the steering pad switch assembly (RH side) to the steering wheel sub-assembly.





(b) Install the screw.

Torque : 2.4 Nm (25 kgf-cm, 21 in-lbf)

(c) Engage the 2 claws and pin to install the steering pad switch assembly (LH side) to the steering wheel sub-assembly.





(d) Install the screw.

Torque : 2.4 Nm (25 kgf-cm, 21 in-lbf)

6. INSTALL STEERING SHAKE DAMPER

(a) Install the steering shake damper to the steering wheel assembly with the 2 screws.





Torque : 2.4 Nm (25 kgf-cm, 21 in-lbf)

7. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD

8. ADJUST SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY Installation

9. INSTALL STEERING WHEEL ASSEMBLY

(a) Align the matchmarks on the steering wheel assembly and steering main shaft.





Text in Illustration





(b) Install the steering wheel assembly set nut.

Torque : 50 Nm (510 kgf-cm, 37 ft-lbf)

(c) Connect the connectors to the spiral cable sub-assembly.

10. INSTALL STEERING PAD

HINT
Refer to the instructions for Installation of the steering pad Installation.

11. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD

12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
* Make sure that the cable has been disconnected from the battery terminal for at least 2 seconds before reconnecting the cable.
* Connect the cable to the negative (-) battery terminal with the front wheels facing straight ahead.
* When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

13. INSPECT STEERING PAD Installation

14. INSPECT SRS WARNING LIGHT

(a) Inspect the SRS warning light Diagnosis System.