Removal

PARK ASSIST / MONITORING: CLEARANCE WARNING BUZZER: REMOVAL

1. PRECAUTION (w/ Navigation System for HDD)

NOTICE:
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the engine switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) battery terminal.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY Removal

4. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY Removal

5. REMOVE INSTRUMENT PANEL GARNISH LH Removal

6. REMOVE NO. 1 SWITCH HOLE BASE Removal

7. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Removal

8. REMOVE INSTRUMENT PANEL FINISH PANEL Removal

9. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL Removal

10. REMOVE RADIO RECEIVER ASSEMBLY WITH REGISTER Removal

11. REMOVE CLEARANCE WARNING BUZZER

(a) Disconnect the connector.





(b) Disengage the clamp and remove the clearance warning buzzer.